Watch repair can be an intricate affair with so many small parts that cannot be seen with a mere look. These require an experienced watchmaker who uses a horoscope and a variety of necessary tools to get the job done. When armed with the right repair tools, this profession can be exciting. So, what are some of these essential gadgets that a horologist must have in his kit?
Watch case opener
The number one crucial tool for a watch repairer is a watch case opener because he can never find out the problem with the watch without opening it. Right? However, there is a different mechanism in various watches. Some have screws, while others have levers. For those with screws, they might need an adjustable Jaxa tool. A simple case opener knife can open those with a snap while inserting the chamfer’s blunt blade. Then in an anti-clockwise manner, the jeweler twists to open the case.
One of the most common problems that watchmakers encounter in a watch repair process is adjusting the watch’s size. That could be a gift, and it turns out to be loose, and it is essential for a watch to fit your wrist perfectly. Link remover is the tool that helps to remove those pins from the bracelet and adjust the watch accordingly.
Like we all know how small the watch’s parts are, it’s hard to see them clearly without an eyeglass. It is a must-have tool in your kit, which comes in various sizes and shapes. And since we can’t finish covering them in this article, we shall only look at two types;
General eyeglass: As the name depicts, general-eyeglass is the most used tool to watch dismantling and reassembling. It has 3-4 times magnification.
Inspection eyeglass: It is not used as often as the general eyeglass, but only when a watchmaker wants to have a closer look at pivots or do some closer inspection.
When you look for quality eyeglasses, you will bump into numbers such as 1, 1.25, and more. These numbers correspond to the focal length of the object. That means the closer you get to the item, the greater your eyestrain will be. A wire eyeglass can come in handy for those struggling to handle the eyeglass. Ensure to work at a reasonable distance.
When a watchmaker removes the watch movement for a watch repair, he needs to place it without touching it with his fingers securely. That’s how the movement holder comes in handy to handle this. Although they appear in different shapes and sizes, the standard one is quite ideal since it is reversible and caters to various size movements.
Rubber dust blower
These are quite useful and inexpensive. As delicate as watches are, you probably know that they don’t mix with dust or dirt. Using a dust blower is a safer way of removing any dust from the watch. Please avoid using your mouth to blow off the dust since it can instead fill the watch with moisture, affecting the watch’s functioning and causing more damage.
After a watchmaker does the unscrewing for watch repair, he will need to collect all those screws using a tweezer. In-state you are wondering, this is not the identical tool used in beauty cosmetics; their design is quite precise for easy operation. The most common types include;
Brass AM; used to mark the watch parts to give the repairer a precise work point.
Plastic; this can be optional if you are working with quartz. Others have numbers from 2 for flat-tips, 3 for fine-tips, and 5 for short $ extra-fine hairsprings.
Tweezers come in different types but choose the non-magnetic to avoid screws from sticking as you work. Hold the tweezers between your two fingers and the thumb as you rotate them in a 360 degree. At first, it might be challenging, but with practice, it will get better.
A screwdriver is one of the vital devices in a watch tool kit. That’s because a watch entails small pins that only a screwdriver can drive out/in, which comes in different sizes. Same as tweezers, this tool should be non-magnetic, not to be a nuisance while working with other pins. A magnet can also affect the accuracy of a watch.
Like many projects, a watch repair process also requires a hammer to hit those pins and place them in the right place. It is not the same size of hummer used in construction, but a small device designed explicitly for repairing watches.
Spring bar tool
A spring bar is usually included in a watchmaker kit to remove and attach the watch band. It helps to remove the spring bar effortlessly. It is crucial to check for the best quality for better results.
The parts of a watch need to go to a different place as you disassemble and reassemble them. The box needs to have a cover to protect it from any dust, especially after cleaning it. It may not be a tool per se, but it helps the repairer get organized and makes his work more comfortable.
In Conclusion, a watchmaker understands the essence of having a professional watchmaker tool kit for efficient watch repair. The kit contains a lot of useful and high-quality tools. However, these are some of the essential tools he will need.