How to Make a Bench Pillow With a Removable Cover

November 1, 2021
37
Views

 

Find out exactly how to make use of a textile shower drape to stitch an upholstered cushion for a kitchen area banquette, window seat or outdoor patio furniture.

Craft IdeasFurniture & AccessoriesKitchensSewingWindow Seats

With these guidelines, you can produce a custom-made, foam-filled bench pillow to fit any type of space. If you’re looking for an affordable, durable textile for this project, look no further than the shower curtain aisle of your favorite store.

3″ foam (big enough to cover the seat or bench).

home decorator/outdoor textile (material shower drapes are a budget friendly option!).

sew-on Velcro.

Make use of a marker on the foam to mark the dimensions of your pillow. Meticulously cut along the lines utilizing a serrated tool like an electric carving knife. For the best outcomes use sluggish sawing motions and also try to maintain the blade as straight as possible.

More tips about:Make Seat Cushions

Action 2: Cut Fabric.

Fold your textile in half or place 2 layers on top of each other, wrong-side facing up. Area the foam on top as well as trace around it. Making use of a ruler and also rotating cutter or scissors, thoroughly cut 1/2″ far from your traced line for seam allowances. Be sure to puncture both layers, these will be your top and bottom pieces of the padding cover.

 

Cut a 4″ tall strip that will run along the front of the pillow cover. It will need to be as long as the lengthy side of the cushion plus 1″ for seam allowance.

 

Cut both short-side pieces of the cushion cover; they must be 4″ high and also 3″ longer than the short sides of the cushion.

 

For the back flaps (where the Velcro closures will be), you will certainly need two items as long as the front strip and also 4-1/2″ tall (they will certainly overlap). Note: if you are utilizing a shower curtain you can cut your back flaps along the hemmed edge in which instance they would just require to be 3-1/2″ large.

 

Action 3: Sew Edge Parts.

Stitch the side items to the front item to develop one long edge item. To do this, lay one side item on top of the front item along the short end, right-sides encountering. Pin as well as stitch along the brief side with a 1/2″ seam allocation. Repeat beyond.

 

Tip 4: Attach Top and Base Panels.

Lay the top panel right-side up. Line up the long side item along the edge, wrong-side up. See to it the joints of your edge item compare 1/2″ from each edge. Pin the corners. Then include pins along the lengthy leading edge as well as down each side (Image 1). With a 1/2″ seam allowance, stitch down one brief side up until you reach the corner pin. With the needle in the down placement, lift the presser foot, eliminate the pin and rotate the work 90 degrees to stitch down the long edge (Image 2). Repeat these actions when you get to the various other edge pin. Repeat this process to attach the bottom panel to the side piece. Transform it right-side-out to inspect your seams (Picture 3).

 

Tip 5: Hem Back Flaps.

Fold up one long edge of your back flap up 1/2″ on the wrong side as well as iron flat, after that fold it up one more 1/2″ and also iron; this needs to conceal the raw edge. Stitch along the folded up edge to produce a hem. Repeat on the other flap piece. Then repeat the process for the brief sides of the back flaps. Your back flaps will currently be hemmed on 3 sides. If you utilized the hem of a shower drape you will just need to hem the short sides.

 

Step 6: Affix Back Flaps.

Line up the back edge of the top of the padding cover with the raw side of one of the back flaps, right-sides encountering. Pin as well as sew with a 1/2″ seam allowance. Repeat underneath

Article Categories:
lifestyle

All Comments

Leave a Reply

Your email address will not be published. Required fields are marked *