How to

How To: 5 Steps to Build a Gravel Driveway

For yards, gardens, a gravel driveway is a great form of trail material. For driveways, especially long driveways, it’s also a viable choice. They’re less costly, quick to manage, and look fabulous when done correctly. Consider that many quiet zen gardens make extensive use of gravel trails.

In fact, since it looks more natural, it can be transported easily and is much less costly, many golf courses opt for gravel pathways over concrete or asphalt.

Benefits of Gravel Walkways and Paths

  • Far less than concrete or asphalt prices.
  • Gravel is less permanent as well. In other words, your path will be there forever when you pave, unless you get it dug up by big machine pros.
  • You will be able to change it in the future if you like, only by collecting the gravel, removing the underlay, and covering the path with sod or grass seed when you want a gravel-style path. Gravel is very pretty resilient and low-maintenance!
  • Natural-looks. For pathways, gravel is a really natural-looking material, more so than concrete or asphalt.

5 Steps to Build a Gravel Pathway

  1. Plan Shape, Size, and Placement

Crisp Architects - Traditional - Exterior - New York - by Crisp Architects

The size, shape, and location of the path must first be planned and its dimensions determined. Before you do anything else, you’ll need to map out and calculate your prospective golf path.

Accurate measurements would ensure that enough gravel is ordered and that appropriate materials for the foundation are purchased. An underlay should be given for each gravel drive, which strengthens it and deters water-logging and flooding. It’s also going to deter weed growth.

These days, most individuals tend to use grids for plastic paving. They are accessible, permeable, and built to add pathways with loads of power.

  1. Dig Up Grass And Topsoil

You will need to dig up grass and topsoil along your potential pathway once you have your measurements. For each layer of gravel that you intend to put down, dig up three inches of topsoil. It is fairly common to add three layers of gravel, so consider this layering before you put an order for gravel. Shoot for four to six inches of the total thickness.

  1. The Underlayer

You will be able to install your underlayer after you dig out the topsoil. We recommend that your underlayer materials be ordered online. Plastic paving grids are lightweight, so shipping shouldn’t require you to spend a lot of money. If you want an underlayer for plastic sheeting, look for one in your neighborhood or online. Bear in mind that over time, the plastic sheeting can erode and contribute to weeds’ growth. Grids for plastic paving will prevent the growth of weeds.

  1. Spread The Gravel

It will be time to spread the gravel on top, in three even layers, once the underlayer is in position. In order to ensure that they are uniformly distributed, rake the stones. Do not forget to spread the gravel, so you end up with a crown that is a fancy way to say that it is slightly elevated in the middle of the driveway or road. This helps with water drainage.

  1. Put In Borders

To these channels, certain individuals add boundaries. However, most do not, as golf buggy paths appear to belong, which implies that it is quite an undertaking to add borders along both sides. Please consider wood or larger stones if you want a border.

Type of Rocks for Gravel Driveways

Aggregates Overview - Aggregates, Sand, and Gravel | Powerscreen

Your gravel should be machine crushed or dense-grade gravel when choosing gravel. Here’s the reason.

  1. Machine Crushed

You should know that you should use machine-crushed rock instead of natural round pebbles before moving into the rock form. Crushed rock is angular and stabilizes easier than displacing flat, round stones. If you use round stone, the walkway or the drive will be preserved forever.

  1. Types Of Rock

The best type of rocks used for gravel driveways:

  • Limestone
  • Traprock
  • Washed gravel
  • Granite
  • Argillite
  • Quartzite

You will need to choose “the grade” of the gravel. You want 1′′ to 3/4′′ quality gravel for driveways and walkways that are also dense-grade.

  1. Dense-Grade Gravel

Another consideration of the rock is to get what is called “dense-grade gravel,” which includes rock dust in the mix. This dust acts as a cohesive agent to keep the rocks in place.

Our recommendations

These five steps might be easy to read, but employing these steps requires enough knowledge and skills to properly do your gravel pathways. If you want to make sure your gravel driveway is made with quality, hire professional lawn replacement contractors today!

Louie is the father behind the travel blog Browseeverywhere.com. He has a background in photography, E-commerce, and writing product reviews online at ConsumerReviews24. Traveling full time with his family was his ultimate past-time. If he’s not typing on his laptop, you can probably find him watching movies.

About the author

louiemissap

Add Comment

Click here to post a comment

FOLLOW US

FREE ADD YOUR BUSINESS

Advertisement

FOLLOW US

CopyAMP code